I cleaned the carb and took out the needles and cleaned all the passages. Once installed, it fired right up ! Runs great, I took it for a spin. New problem: I tried to start it again and nothing happens; I suspect that I have a bad battery cable. Battery is fully charged.
Thanks everyone.
Baldwindiesel
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1250 Hydro update
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
baldwindiesel
- 10+ Years
- Posts: 252
- Joined: Tue Sep 11, 2012 9:21 pm
- Zip Code: 44820
-
BigBill
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 1250 Hydro update
Does the solenoid click? Do you hear it? I would clean the ground cable where it attachtd to the frame.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
baldwindiesel
- 10+ Years
- Posts: 252
- Joined: Tue Sep 11, 2012 9:21 pm
- Zip Code: 44820
Re: 1250 Hydro update
BigBill: 1250 is up and running great ! Starting issue seems to have cleared up.
Thanks ! Baldwindiesel
Thanks ! Baldwindiesel
Who is online
Users browsing this forum: No registered users and 3 guests
