Roto-tiller RPM's

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Bob Perry
5+ Years
5+ Years
501 Club
501 Club
Posts: 1863
Joined: Sun Feb 22, 2009 3:30 pm
Zip Code: 02748
Tractors Owned: :

1949 Farmall Cub / FH

1951 Farmall Cub / IH mower

1964 International Cub Lo-Boy / Woods 59 mower

1967 International Cub / FH

1946 Farmall H

1949 Farmall H

a doodle bug

More than a dozen Cub Cadets running plus a few in the bone-yard

.
Location: Dartmouth, Massachusetts

Roto-tiller RPM's

Postby Bob Perry » Fri Aug 31, 2012 11:37 am

Does anybody know about what RPM's a Cub Cadet roto-tiller runs at? I am mounting a gas engine on mine, to tow with an old Cub Cadet.

(I have no problem doing the math to figure out the pulley sizes to reduce it from engine RPM's.) I have a good collection of pulleys, pillow blocks, shaft stock, etc.
REMEMBER: Keep it correct or you may face the

Image

User avatar
Bob Perry
5+ Years
5+ Years
501 Club
501 Club
Posts: 1863
Joined: Sun Feb 22, 2009 3:30 pm
Zip Code: 02748
Tractors Owned: :

1949 Farmall Cub / FH

1951 Farmall Cub / IH mower

1964 International Cub Lo-Boy / Woods 59 mower

1967 International Cub / FH

1946 Farmall H

1949 Farmall H

a doodle bug

More than a dozen Cub Cadets running plus a few in the bone-yard

.
Location: Dartmouth, Massachusetts

Re: Roto-tiller RPM's

Postby Bob Perry » Sat Sep 01, 2012 6:00 am

I guess we stumped the crowd on this one. I'll probably shoot for 300 / minute.
REMEMBER: Keep it correct or you may face the

Image

User avatar
Rudi
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 28707
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Re: Roto-tiller RPM's

Postby Rudi » Sat Sep 01, 2012 8:43 pm

Bob:

What model Roto-Tiller :?:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


Paul B
10+ Years
10+ Years
501 Club
501 Club
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Re: Roto-tiller RPM's

Postby Paul B » Sat Sep 01, 2012 8:44 pm

When you do the math, don't forget the right angle gear box is not 1 to 1. The bevel gear on the input shaft is a 20 tooth gear, and the gear on the output shaft is a 30 tooth gear. I don't have a manual on any of the tillers, but I don't think I have ever seen or heard what the rpm might be.

Eugene
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 15051
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Roto-tiller RPM's

Postby Eugene » Sun Sep 02, 2012 9:44 pm

Just did a web search on tiller tine rpms. Surprised at the number of different tine rpms.

Do a web search for Cub Cadet tiller tine rpms. Number of hits.
I have an excuse. CRS.

User avatar
Bob Perry
5+ Years
5+ Years
501 Club
501 Club
Posts: 1863
Joined: Sun Feb 22, 2009 3:30 pm
Zip Code: 02748
Tractors Owned: :

1949 Farmall Cub / FH

1951 Farmall Cub / IH mower

1964 International Cub Lo-Boy / Woods 59 mower

1967 International Cub / FH

1946 Farmall H

1949 Farmall H

a doodle bug

More than a dozen Cub Cadets running plus a few in the bone-yard

.
Location: Dartmouth, Massachusetts

Re: Roto-tiller RPM's

Postby Bob Perry » Sun Sep 02, 2012 10:57 pm

@ Rudi I believe it's a 1-A, but no tag

@ Eugene- good ol' Google ... I guess I'll aim for that 190 area to start

Thanks !
REMEMBER: Keep it correct or you may face the

Image

Smokeycub
5+ Years
5+ Years
501 Club
501 Club
Posts: 891
Joined: Tue Apr 26, 2011 10:47 am
Zip Code: 44266
Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C
Circle of Safety: Y
Location: Ravenna, Ohio

Re: Roto-tiller RPM's

Postby Smokeycub » Wed Jan 23, 2013 12:40 pm

Does anybody know about what RPM's a Cub Cadet roto-tiller runs at? I am mounting a gas engine on mine, to tow with an old Cub Cadet.


Bob, I know this is way after the fact since you first posted this back in August but I felt I need to relay my story here. A few years ago I attempted to run a roto-tiller off the back of my F Cub using the Cubs pto. I used a reguar pto drive shaft connected to a right angle drive unit on the tiller, I do not recommend that, actually kind of scary! As you know the pto shaft runs at engine speed so the tiller was running roughly 500 to 600 rpm through the speed reduction on the tiller. My problems were twofold. 1) the tiller ran way too fast! It was throwing rocks and chunks of dirt 20 to 30 feet :shock: . I could have slowed it down mechanically but... problem 2) even in 1st gear the Cub goes too fast to dig really well, even when I throttled back, pretty much the same reason the big Cubs aren't running snow plowers without auxillary power or gear reduction. How did your project work out?
Ray
Smokeycub
Attachments - 193 plow - 144 cultivator - 22 mower - 28A disc harrow - 54 leveling blade - Woods 59C2 - drag harrows - Mott D9 flail - flat belt pulley

The squeaky wheel may get the grease but it's usually the first to be replaced!

User avatar
Bob Perry
5+ Years
5+ Years
501 Club
501 Club
Posts: 1863
Joined: Sun Feb 22, 2009 3:30 pm
Zip Code: 02748
Tractors Owned: :

1949 Farmall Cub / FH

1951 Farmall Cub / IH mower

1964 International Cub Lo-Boy / Woods 59 mower

1967 International Cub / FH

1946 Farmall H

1949 Farmall H

a doodle bug

More than a dozen Cub Cadets running plus a few in the bone-yard

.
Location: Dartmouth, Massachusetts

Re: Roto-tiller RPM's

Postby Bob Perry » Wed Jan 23, 2013 3:01 pm

I did good. Since I posted that, I came across a 104 with a creeper gear, and it does excellent. When I posted it, I was thinking about dedicating a gas engine to the tiller, but I learned that the 104 certainly has enough power to run the tiller.

Coincidentally, at the end of the season, my creeper gearbox started jumping out of high, and I in fact plan to take a look at it on Saturday, during the mini-Fest we're having here.

When a Cub is used to till, they use gear-reducers off the final drives. But at this time, the CC 104 is perfect for what we need it for.
REMEMBER: Keep it correct or you may face the

Image

voltage regulator
Posts: 34
Joined: Sat Mar 16, 2013 9:53 pm
Zip Code: 44062
Tractors Owned: IH Cub Cadet 1450
IH Cub Cadet 1450 parts
IH Cub Cadet 1250 parts
IH Cub Cadet Original
IH Cub Cadet 100
IH Cub Cadet 71
IH Cub Cadet 123
IH Cub Cadet 102
IH Cub Cadet 72
IH Cub Cadet 86
CCC 1211
Location: Middlefield, Ohio

Re: Roto-tiller RPM's

Postby voltage regulator » Sun Mar 17, 2013 12:31 am

The gear box turns counter clockwise at 1800 rpm . The gear box can also be used as a power take off , which can be mounted in two different ways. I'm not sure yet how fast the tines turn, if that is what you were asking. I have a nice #1 IH tiller with both extensions, and with about 70% tine life left yet.

Operator's Manual Setting Up Instructions International Tiller #1 can be down loaded for free at http://www.cubcadetcollectors.com .

outdoors4evr
5+ Years
5+ Years
501 Club
501 Club
Posts: 991
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48423
Tractors Owned: 184
Location: Davison, MI

Re: Roto-tiller RPM's

Postby outdoors4evr » Thu May 16, 2013 9:09 am

Probably don't need this information now, but I found your answer.
The tines of a model 15 tiller (while connected to a 184) turn at 200 RPM's.
Image
This picture is blurry, but it shows the RPM's in the text.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller

jpw19798
Posts: 3
Joined: Tue May 06, 2014 1:23 pm
Zip Code: 17529

Re: Roto-tiller RPM's

Postby jpw19798 » Tue May 06, 2014 1:26 pm

Do you have the rest of this ad for the 184? Could I get a copy of it if you do?

outdoors4evr
5+ Years
5+ Years
501 Club
501 Club
Posts: 991
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48423
Tractors Owned: 184
Location: Davison, MI

Re: Roto-tiller RPM's

Postby outdoors4evr » Tue May 13, 2014 10:21 am

Yes, I have this as .jpg files (although blurry)
PM Sent.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller

BigBill
10+ Years
10+ Years
501 Club
501 Club
Posts: 6043
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: Roto-tiller RPM's

Postby BigBill » Tue Jul 01, 2014 7:04 pm

Why not run it off the cadet power? My rear tiller on my cadet 100 works awesome.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.


Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 0 guests