Does anyone know of a direct replacement Briggs or Techumse engine that would be a direct replacement for a K301 in a model 122? The 301 lost a rod, rod cap, deeply scared the crank and broke the camshaft and a broken piston ring badly scared the cylinder to bad to salvage. A used Briggs or Tecumsee would be more readily available and much cheaper. This Cub is not to work but to build as a "Black and White Patrol Vehicle" for area parades and events, just for show.
Thanks, ly134
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Replacement for Kohler???
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- wdeturck
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
Lyl: I think what you will find trying to use a B&S or Tech. that the centerline of the crank won't be the right height and connecting up the drive shaft will take some reworking as A Cub Cadet use the flywheel side instead of the pulley side for connection. I did put a 8 HP B&S in an Original but since that was a belt drive I only had to get a longer belt to make up for the differences is C/L. I think the Kohler setup worked on the B&S flywheel end. You can make anything work but a used Kohler might end up less trouble
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
Who is online
Users browsing this forum: No registered users and 5 guests