The wire harness on my 127 is getting to the point of no return. I would hate to refurbish this tractor and put the old harness back on. It's half cobbled up and brittle now. So, where is the best place to get a new one? My local IH/CC dealer? I am worried about fit. The tractor has electric start and lights front and rear.
Thanks, S.H.A.F.T.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
127 wire harness
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 156
- Joined: Sun Mar 02, 2003 6:41 pm
- Location: Millersville, PA
127 wire harness
"Son, you can do it right, or you can do it again."
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
The replacement wiring harness I have seen from Cub Cadet are pretty good and have a good fit, although the wire color may be a bit off shade. You can also find parts here,
http://www.ccspecialties.org/
but may find some prices higher than a Cub Cadet dealer.
http://www.ccspecialties.org/
but may find some prices higher than a Cub Cadet dealer.
Who is online
Users browsing this forum: No registered users and 13 guests