This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Cub vs Cadet Transmission - Have a Question

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Cub vs Cadet Transmission - Have a Question

Postby AL Farmall Boy » Thu Aug 11, 2011 12:27 pm

Do the cadet transmissions have a hole where the PTO shift lever goes on a regular Cub tractor? If so, was the hole plugged or just left open? I am needing a plug for the hole in question.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

SPONSOR AD

Sponsor



Sponsor
 

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Cub vs Cadet Transmission - Have a Question

Postby AL Farmall Boy » Thu Aug 11, 2011 12:45 pm

Just found this on the CASE/IH site under the 154 loboy section. Looks like it is a 11/16 expansion(?) plug. Number 16 in the picture. Where might I pick one of these up? THANKS!
Attachments
cub trans.JPG
cub trans.JPG (29.49 KiB) Viewed 452 times
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

User avatar
bob in CT
Team Cub Mentor
Team Cub Mentor
Posts: 6018
Joined: Thu Jun 07, 2007 9:34 am
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety: Y
Location: CT, Manchester

Re: Cub vs Cadet Transmission - Have a Question

Postby bob in CT » Thu Aug 11, 2011 1:19 pm

AL Farmall Boy wrote:Just found this on the CASE/IH site under the 154 loboy section. Looks like it is a 11/16 expansion(?) plug. Number 16 in the picture. Where might I pick one of these up? THANKS!

Try NAPA. Same thing as a "freeze" plug in an engine block. TM is on holiday otherwise they probably stock them. Install it with the cup facing out. Give the center a rap with a hammer and punch and it will expand and seal the opening.

Bob McCarty
Team Cub
Team Cub
Posts: 11827
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Cub vs Cadet Transmission - Have a Question

Postby Bob McCarty » Thu Aug 11, 2011 2:43 pm

I have a Cub that had a piece of wooden dowel inserted there to seal it. Seems to work fine.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Cub vs Cadet Transmission - Have a Question

Postby AL Farmall Boy » Thu Aug 11, 2011 4:24 pm

Ok. Thanks for the help!
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:


Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 10 guests