This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Compatability between Cub Cadet 100 and 122

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Cub Puller
10+ Years
10+ Years
Posts: 1
Joined: Sun Jul 31, 2011 7:21 pm
Zip Code: 05773

Compatability between Cub Cadet 100 and 122

Postby Cub Puller » Sun Jul 31, 2011 7:26 pm

Are the rear end and transmission the same in the model 100 and 122?

SPONSOR AD

Sponsor



Sponsor
 

User avatar
JimT
10+ Years
10+ Years
Posts: 2182
Joined: Sun Apr 08, 2007 9:36 am
Zip Code: 38482
Tractors Owned: 1949 Cub-Buttercub
582 Cub Cadet-Brutus
109 Cub Cadet-Bee-atrice
129 Cub Cadet-Artie
Location: TN, Santa Fe (South of Nashville)

Re: Compatability between Cub Cadet 100 and 122

Postby JimT » Sun Jul 31, 2011 9:11 pm

Looking at the parts manual they both have wet brakes so I would suspect they are interchangeable. But others will chim in about it also.
JimT

Image

If you can't find it, don't lose it.

User avatar
gitractorman
10+ Years
10+ Years
Posts: 2678
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: Compatability between Cub Cadet 100 and 122

Postby gitractorman » Mon Aug 01, 2011 6:45 am

Yep, they're the same.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller

Paul B
10+ Years
10+ Years
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Re: Compatability between Cub Cadet 100 and 122

Postby Paul B » Wed Aug 03, 2011 9:26 am

Just for info purposes, all the IH built Cub Cadet gear drive transmissions (except for the Original, and models 1100, 482 and 582 Special and the Cadet Lawn tractor models) are a bolt in interchange as long as you stay with the same brake type, that is internal brake trans with internal brake trans, disc brake with disc brake etc. The shift lever may be a different shape and length (because of the different fender pans) but they will interchange also. The internal and external disc brakes can be changed, but that can be a bit more complicated because there are some internal differences, the bottom transmission or pinion shaft for one, that will require disassembly of the transmission (the internal brake disc mounts on the front of this shaft and the shaft is different than the disc brake model). Some of the late Quietline models and the 82 series had aluminum axle housings, but will still interchange. The hydros will also interchange, again, as long as you stay with the same brake type.

Larry G
10+ Years
10+ Years
Posts: 873
Joined: Mon Oct 01, 2007 4:53 pm
Zip Code: 46163
Tractors Owned: 1957 Farmall Cub
1963 Farmall Cub
193 Plow
54A Blade
Circle of Safety: Y
Location: IN, New Palestine

Re: Compatability between Cub Cadet 100 and 122

Postby Larry G » Thu Aug 04, 2011 7:59 am

I thought there was a differance in the gear ratios. If I remember 2nd gear in the 100 had a slower ground speed.

Larry

Paul B
10+ Years
10+ Years
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Re: Compatability between Cub Cadet 100 and 122

Postby Paul B » Thu Aug 04, 2011 6:04 pm

There were 3 different 2nd gear ratios used in the Cub Cadets, but they really don't alter the fact that the transmissions from one model will bolt into another model. The 3 different 2nd gear's are interchangeable as long as you change both the sliding gear and the fixed gear as a set (52 total teeth between the two gears). The Original thru 70/100 serial number 96765 had a 16 tooth sliding gear, 36 tooth fixed gear. From that S/N to the wide frame models a 19/33 tooth gear set was used, and the wide frames and later (86,108, 128, 800, 1000, 1200, 582), a 17/35 tooth set was used. The other gear ratios are the same in all models.


Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 4 guests