Page 1 of 1
Voltage Regulator 102
Posted: Fri May 27, 2011 10:30 pm
by lafleur94
I bought a voltage regulator for my cub 102. the posts are all differently labeled than the original. unfortunatly i wired it up so it wouldnt arch out and it fired up and ran great! but the generator got so hot that it smoked a little. and burned to the touch. the posts lable Top: F middle: Bat Bottom: L. on the back there is another post. i have it ground to the bottom of the regulator. i also have no lights. i have tried everything i can think of! im lost help please
THANKS
Re: Voltage Regulator 102
Posted: Sat May 28, 2011 8:20 am
by Eugene
E-mail sent, Operator's manual for the 102. Electrical system (includes wiring diagram) is on pages 14 thru 19.
Re: Voltage Regulator 102
Posted: Sat May 28, 2011 8:47 am
by wdeturck
lafleur94 wrote:I bought a voltage regulator for my cub 102. the posts are all differently labeled than the original. unfortunatly i wired it up so it wouldnt arch out and it fired up and ran great! but the generator got so hot that it smoked a little. and burned to the touch. the posts lable Top: F middle: Bat Bottom: L. on the back there is another post. i have it ground to the bottom of the regulator. i also have no lights. i have tried everything i can think of! im lost help please
THANKS
Sounds like you left the good smoke out of the S/G(the generating coil is shot) and you probably need another VR. The VR that have the L(load or light) are internally hooked to the Batt.
Re: Voltage Regulator 102
Posted: Sat May 28, 2011 4:49 pm
by Paul B
That is not the correct VR, but it will work if it is connected correctly. That post on the back is not a ground, it should go to the armature post on the starter generator, and nothing connected to the "L" terminal. The "F" terminal connects to the starter generator Field post. The "Bat" connects to the solenoid. You have probably fried the starter generator.
Re: Voltage Regulator 102
Posted: Sat May 28, 2011 9:10 pm
by lafleur94
all is well guys. i wired it up and turned the key and she fired right up! the battery seems to be charging and the S/G is at a normal running temp. thanks for all your help!
Re: Voltage Regulator 102
Posted: Thu Jun 02, 2011 10:34 am
by BigBill
These can be a real PIA at times but when its finally right a load has been lifted off or backs. Life is good when the needle goes in the charging area.
I have one that charges when it wants too. Sometimes it charges and sometimes it don't. I will pull the cover and clean the contacts on the VR first. The VR seems lazy. Bill