Thoughts.
Haven't torn tractor down so don't know the answer.
122 Cub Cadet. Stuck in reverse. Shifter floats - nothing. Clutch and brake work. Tractor starts and drives great in reverse.
Drove the garden tractor backwards up ramps and into the pickup bed. Removed the spark plug and planned on rolling the tractor forward (engine turning backward) out of the pickup bed. Rear tires spin in opposite directions. Transmission drive shaft does not turn when pushing tractor forward with spark plug removed.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Trivia Question.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Mentor
- Posts: 20393
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Trivia Question.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: Trivia Question.
Try pushing the clutch in and see if it will let it roll, but just enough to declutch and not enough to apply the brakes. The wheels turning in opposite directions is normal, just as it would be if you jacked up the rearend and turned one wheel, the other one would turn the opposite way. Just the nature of the beast..........and the differential. If the declutching doesn't work, it's time to pull the transmission top plate and shift it into neutral, and repair the shifter.
-
- Team Cub Mentor
- Posts: 20393
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Trivia Question.
Done that. Should have added it in the problem description.Paul B wrote:Try pushing the clutch in and see if it will let it roll, but just enough to declutch and not enough to apply the brakes.
Depress the clutch and the tractor will roll forward about 1/2" then lock up. Depress the clutch and the tractor will roll backward.
Shifter for sure will have to be repaired or replaced. Guessing there is some thing stuck in or between gear teeth some place.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 82
- Joined: Sun Jul 11, 2010 10:31 am
- Zip Code: 18092
- eBay ID: jrd77vet
- Tractors Owned: Cub Cadet 122
Cub Cadet 125 - Location: PA, Zionsville
Re: Trivia Question.
Eugene wrote:Done that. Should have added it in the problem description.Paul B wrote:Try pushing the clutch in and see if it will let it roll, but just enough to declutch and not enough to apply the brakes.
Depress the clutch and the tractor will roll forward about 1/2" then lock up. Depress the clutch and the tractor will roll backward.
Shifter for sure will have to be repaired or replaced. Guessing there is some thing stuck in or between gear teeth some place.
Something is keeping it from moving forward but it's in their in such a way it can move in reverse. Time to tear it down before more damage is done.
-
- Team Cub Mentor
- Posts: 20393
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Trivia Question.
Pulled the transmission cover. Both shifter forks loose. One just loose and the other really loose and turned to the side. Guessing the really loose shifter turned to the side was ratcheting off of a gear - letting the tractor roll backward but not forward.
Set gears in neutral, tightened up shifter forks. Rolled tractor forward and backward.
Fixed both flat front tires. Son started tractor up and ran it through the gears.
Set gears in neutral, tightened up shifter forks. Rolled tractor forward and backward.
Fixed both flat front tires. Son started tractor up and ran it through the gears.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 3562
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: Trivia Question.
Eugene....Glad to hear it was a simple fix.
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Re: Trivia Question.
Good thread Eugene , I have a soon to come home 104 its stuck in reverse and shifter come all the way out so I think its the same issue you had on yours 's
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Trivia Question.
did you tac weld the forks? On my 154 loboy the rev/1st fork was the problem and i tightened it up and t5ac welded it. All the cadets i have pulled the shifter cover on to check them while i had it apart were welded already. I put a tac where the fork loops were the bolt is back to the fork body. There is an open tang there thats not supported. I just copied what i seen on all the cadets so far. My 154 shifts awesome now and the shifter forks comming loose again is a case of forget it. I hate doing the samething over and over. I taught my kids not to force the shifter too and let the clutch up a tad so the gears will spin to line them up so the'll engage.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1
- 1272
-
by Eugene
Sun Jun 05, 2022 8:04 pm
-
- 6
- 1487
-
by tinnerjohn
Sat Mar 04, 2023 11:06 am
-
- 0
- 832
-
by tmays
Mon Sep 18, 2023 8:37 am
Who is online
Users browsing this forum: No registered users and 2 guests