This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hydro lift 1450
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 588
- Joined: Mon Sep 17, 2007 9:06 pm
- Zip Code: 23069
- Location: Central Virginia
Hydro lift 1450
I replaced the hydro lines on the lift. Lines and cylinder are empty. Should I just start it up and cycle the sytem or do I need to burp the system?
- gitractorman
- 10+ Years
- Posts: 2679
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Hydro lift 1450
Yes, start and cycle the lift up and down. It will take a while, but that is the only way to bleed the air out of the system. It will not hurt anything to run it with the air in it, so I would not bother trying to burp it, you'll just make a mess. The air will return to the reservoir (rear differential) and will not get into the pump, so it's perfectly fine.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
Who is online
Users browsing this forum: No registered users and 8 guests