Artie is underway! (Pics Added 1-2...6-7)

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
JimT
5+ Years
5+ Years
501 Club
501 Club
Posts: 2182
Joined: Sun Apr 08, 2007 9:36 am
Zip Code: 38482
Tractors Owned: 1949 Cub-Buttercub
582 Cub Cadet-Brutus
109 Cub Cadet-Bee-atrice
129 Cub Cadet-Artie
Location: TN, Santa Fe (South of Nashville)

Artie is underway! (Pics Added 1-2...6-7)

Postby JimT » Fri Jan 07, 2011 6:13 pm

Well I am starting another project, Artie. It's going to be an articulating cub cadet. I am using two hydrostats to move it. The front hydro will be turned around and the rear hydro will be left facing forward. So I guess it will be 4-wheel drive when it is done. Here are a couple of photos of what has been done so far.

IMG_0006.JPG


IMG_0007.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by JimT on Wed Sep 07, 2011 6:50 pm, edited 7 times in total.
JimT

Image

If you can't find it, don't lose it.

User avatar
JimT
5+ Years
5+ Years
501 Club
501 Club
Posts: 2182
Joined: Sun Apr 08, 2007 9:36 am
Zip Code: 38482
Tractors Owned: 1949 Cub-Buttercub
582 Cub Cadet-Brutus
109 Cub Cadet-Bee-atrice
129 Cub Cadet-Artie
Location: TN, Santa Fe (South of Nashville)

Re: Artie is underway!

Postby JimT » Fri Jan 07, 2011 6:15 pm

Here are a couple photos of the front driveshaft hookup.

IMG_0004.JPG


IMG_0005.JPG
You do not have the required permissions to view the files attached to this post.
JimT

Image

If you can't find it, don't lose it.

User avatar
JimT
5+ Years
5+ Years
501 Club
501 Club
Posts: 2182
Joined: Sun Apr 08, 2007 9:36 am
Zip Code: 38482
Tractors Owned: 1949 Cub-Buttercub
582 Cub Cadet-Brutus
109 Cub Cadet-Bee-atrice
129 Cub Cadet-Artie
Location: TN, Santa Fe (South of Nashville)

Re: Artie is underway!

Postby JimT » Fri Jan 07, 2011 6:19 pm

I did a test of it today and the hydro is going to work properly. I had to rotate the charge pump 180 degrees to get the hydro to pump. I started it up and ran the hydro linkage by hand and the tires rotated properly. Now I have to figure out how to connect the rear half. The front half is a 129 and the rear half is going to be from a 147. Here is a photo of the rear half that I will be using.

05 Rear half 147 cub.JPG


Oops. Got to run for now. Got to go make dinner for the wife. Got to keep her happy so I can play with these things. :lol:
You do not have the required permissions to view the files attached to this post.
JimT

Image

If you can't find it, don't lose it.

User avatar
grumpy
10+ Years
10+ Years
501 Club
501 Club
Posts: 2781
Joined: Tue Jan 10, 2006 12:03 am
Zip Code: 15522
eBay ID: grumpysales
Circle of Safety: Y
Location: PA. Bedford (Centerville)

Re: Artie is underway!

Postby grumpy » Fri Jan 07, 2011 6:38 pm

Keep us posted. Lookin good.
David Dee Mock-Leonard

Nothing is foolproof to a sufficiently talented fool.

Some days it's not worth chewing through the restraints

Bob McCarty
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 7590
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Artie is underway!

Postby Bob McCarty » Fri Jan 07, 2011 7:42 pm

Are Brutus and Buttercub getting jealous yet? :D Jim, looks like another nice project from you.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Mr E
5+ Years
5+ Years
501 Club
501 Club
Posts: 5668
Joined: Mon Jul 30, 2007 11:48 am
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety: Y
Location: FL, Sneads

Re: Artie is underway!

Postby Mr E » Fri Jan 07, 2011 7:58 pm

JIm, you never cease to amaze me. :lol: :lol:
In the middle of every difficulty lies opportunity. - Albert Einstein


Roy Edenfield
Deep South CubFest #8
February 17 & 18, 2017

User avatar
Bigdog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: Artie is underway!

Postby Bigdog » Fri Jan 07, 2011 9:32 pm

Jim - looks like another very interesting project! I do love your ingenuity! We are looking forward to seeing the completed tractor!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

User avatar
Josh Blair
5+ Years
5+ Years
Cub Star!!
Cub Star!!
Posts: 327
Joined: Mon Oct 19, 2009 4:02 pm
Zip Code: 38474
Tractors Owned: 1950 F-cub
1951 F-cub
1967 Massey Ferguson 150
Circle of Safety: Y
Location: mt.Pleasant TN

Re: Artie is underway!

Postby Josh Blair » Fri Jan 07, 2011 9:39 pm

i have heard it will save fuel with havin no front wheels to push
Josh Blair in Mt.Pleasant TN
Image Image

User avatar
Rudi
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 28707
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Re: Artie is underway!

Postby Rudi » Sun Jan 09, 2011 1:10 pm

Jim:

The level of creativity that is constantly demonstrated by many our members is mind boggling. I have a feeling that this project of yours is going to be simply outstanding. Good luck, have fun and remember Image :D
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
Trent M
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 3324
Joined: Wed Aug 09, 2006 6:21 pm
Zip Code: 62859
Circle of Safety: Y
Location: Illinois Southern

Re: Artie is underway!

Postby Trent M » Sun Jan 09, 2011 9:34 pm

This looks great Jim!! I'd like to drive it when you're done! :)
Trent McPeak

BigBill
10+ Years
10+ Years
501 Club
501 Club
Posts: 6043
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: Artie is underway!

Postby BigBill » Mon Jan 10, 2011 12:58 pm

cool, way to go. I been thinking about this for a while now. Can we power both hydro tranny's with one pump? And just run hoses to the tranny in the rear? I think we need to "TEE" each line to each tranny rather than take the exhaust to the other tranny. This would give us the same speed but we may need flow valves to put both tranny's in sync. So one tranny doesn't lag behind with one being closer to the pump over the other one. That would save a lot of time and trouble. Bill
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

User avatar
JimT
5+ Years
5+ Years
501 Club
501 Club
Posts: 2182
Joined: Sun Apr 08, 2007 9:36 am
Zip Code: 38482
Tractors Owned: 1949 Cub-Buttercub
582 Cub Cadet-Brutus
109 Cub Cadet-Bee-atrice
129 Cub Cadet-Artie
Location: TN, Santa Fe (South of Nashville)

Re: Artie is underway!

Postby JimT » Mon Jan 10, 2011 1:13 pm

BigBill wrote:Can we power both hydro tranny's with one pump? And just run hoses to the tranny in the rear?


I don't know about this. I am going to got with the two complete trannys and try it that way. I am going to try and get the linkages as close as possible.
JimT

Image

If you can't find it, don't lose it.

User avatar
gitractorman
10+ Years
10+ Years
501 Club
501 Club
Posts: 2430
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: Artie is underway!

Postby gitractorman » Mon Jan 10, 2011 2:10 pm

I thought a lot about building one of these a few years ago. I was going to keep both rear-ends facing forward, move the front one as far forward towards the engine as I could get it and use a really short drive shaft. Then run a rear driveshaft off of the back of the front hydro pump, to run the rear hydro. That way both would be spinning the same direction at the same RPM. The rear driveshaft would actually have to be in a few pieces with U joints to incorporate the articulation. I also figured out that you could use cables through guides, to connect the hydro linkage, without having to have solid linkages, and they would incorporate the articulation and should be easy to fine adjust to get the ground speed of both units in line. Regardless of how you go, it's not an easy project. I can't wait to see how Artie turns out.
Bill
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller

User avatar
56cub
5+ Years
5+ Years
501 Club
501 Club
Posts: 749
Joined: Mon Dec 03, 2007 3:44 pm
Zip Code: 15057
Tractors Owned: 1956 farmall cub
Circle of Safety: Y
Location: pa, mcdonald

Re: Artie is underway!

Postby 56cub » Mon Jan 10, 2011 5:40 pm

It's looking great so far. I can't wait to see what the finished tractor will look like. Do you plan on using the tractor to do some work or will it just be a show tractor. If you are going to work it I think it would be cool to build a 3pt hitch and then it would really have a big tractor look. I really hope that one day I will have even a small amount of the skills you have so I can try to build something like this.
1956 Farmall Cub
1943 Farmall M
Cub Cadet 147
Cub Cadet 128-SOLD
1969 Bolens 850 "Special"
1968 Bolens 1050
Allis Chalmers 712S
Wheel Horse B 111
Wheel Horse Electro 12
National triplex reel mower

User avatar
JimT
5+ Years
5+ Years
501 Club
501 Club
Posts: 2182
Joined: Sun Apr 08, 2007 9:36 am
Zip Code: 38482
Tractors Owned: 1949 Cub-Buttercub
582 Cub Cadet-Brutus
109 Cub Cadet-Bee-atrice
129 Cub Cadet-Artie
Location: TN, Santa Fe (South of Nashville)

Re: Artie is underway!

Postby JimT » Mon Jan 10, 2011 10:23 pm

56cub wrote:Do you plan on using the tractor to do some work or will it just be a show tractor. If you are going to work it I think it would be cool to build a 3pt hitch and then it would really have a big tractor look.


I won't work it. It's just another play toy to take to tractor shows (this exercises the jaw muscles) :lol: . I have thought about the 3-point hitch though.
JimT

Image

If you can't find it, don't lose it.


Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 3 guests