The threads on my 125 generator/start posts are very worn to the point of being stripped. Can't get a good tight connection. Is it possible to get new posts and install or best left to a shop? I looked at one parts sight and it said not available.
Craig
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Generator/Starter studs
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- cef2lion
- 10+ Years
- Posts: 81
- Joined: Thu Apr 15, 2010 6:27 am
- Zip Code: 16668
- Location: Central PA
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Generator/Starter studs
Remove the rear cover and check. It appears that the "studs" are bolts. One bolt appears to have a flattened end, tapped for a screw. The other is simply a bolt.
I'm looking at a parts manual for a Wisconsin engine, Delco-Remy generator. Shows studs with two different parts numbers. One for the armature terminal and one for the field termainal.
Your local starter, generator repair shop should have the studs in stock. Either have the parts in hand or the numbers from the starter/generator case.
Just buying and replacing the studs should not be a problem. But, perhaps it would be a good idea to have the starter/generator checked over and repaired. Or if you have the tools, tear down and rebuild it yourself.
I'm looking at a parts manual for a Wisconsin engine, Delco-Remy generator. Shows studs with two different parts numbers. One for the armature terminal and one for the field termainal.
Your local starter, generator repair shop should have the studs in stock. Either have the parts in hand or the numbers from the starter/generator case.
Just buying and replacing the studs should not be a problem. But, perhaps it would be a good idea to have the starter/generator checked over and repaired. Or if you have the tools, tear down and rebuild it yourself.
I have an excuse. CRS.
Who is online
Users browsing this forum: No registered users and 4 guests