109 Hydrostatic Drive Adjustment
Moderators: Team Cadet, Team Cub
3 posts
• Page 1 of 1
109 Hydrostatic Drive Adjustment
by Al Wilson » Mon Oct 27, 2003 8:27 pm
I recently aquired a Cadet 109 with Hydrostatic drive. Everything seems to work Ok with this tractor except the hydrostatic drive lever will not stay put. It slowly slows down from the set position, and I have to keep pushing the lever back up. Isn't there some way to adjust the friction on this lever? Thanks.
- Al Wilson
- Posts: 3
- Joined: Tue Feb 18, 2003 11:12 pm
- Location: Murfreesboro, TN
by Bigdog » Mon Oct 27, 2003 9:29 pm
I'm not sure just where it is on your tractor, but if you follow the hydrostat lever to it's pivot point you should find a friction adjustment.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23786
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
by Tedd Ill » Wed Oct 29, 2003 6:56 pm
This may help.
http://www.ihcubcadet.com/IHCCFAQ/HydroProblems.htm
A owners and sevice manual may help too. They can be had from Binder books.
http://www.ihcubcadet.com/IHCCFAQ/HydroProblems.htm
A owners and sevice manual may help too. They can be had from Binder books.
Had a '57 Lo-boy, and loved it!! Will have another...
Always looking......
Always looking......
-
Tedd Ill - Cub Star
- Posts: 165
- Joined: Sun Feb 02, 2003 8:05 pm
- Location: Lisle, Illinois
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
|
|