This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
rebuild kit
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- brichter
- Cub Pro
- Posts: 1521
- Joined: Sun Jul 11, 2004 2:23 pm
- Zip Code: 32449
- eBay ID: Kinardhippy
- Skype Name: Billy.Ray.Richter
- Circle of Safety: Y
- Location: FL, Kinard
rebuild kit
Does anyone sell a rebuild kit for the Kohler 10 hp motor? We have a Cadet 102 that is in need of a rebuild and we would rather buy the complete kit than try to get all the gaskets and such separately.
If you're gonna dream or steal, do it BIG
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
You can purchase individual parts including a gasket kit from your local auto parts store. One day service on most parts. One over sized piston took a month to be delivered.
It normally costs me around $100- in parts to overhaul one of the K series Kholers.
Normally you will need rings, gasket kit, and exhaust valve. Add another $50- if you need an over sized piston. But you need to wait until the engine is disassembled and measured before ordering parts.
Eugene
It normally costs me around $100- in parts to overhaul one of the K series Kholers.
Normally you will need rings, gasket kit, and exhaust valve. Add another $50- if you need an over sized piston. But you need to wait until the engine is disassembled and measured before ordering parts.
Eugene
I have an excuse. CRS.
Who is online
Users browsing this forum: No registered users and 4 guests