looking for a 42" plow blade (Snow) for 1962 cub cadet

[krochko]

Mike

[Eugene]

Mike. Where are you located? I have two blades, located in Iowa.

Eugene

[krochko]

Oxford ct 06478

is this the full plow with brackets?

Mike

[wdeturck]

Mike: The Original(1961-63) had 2 plows available. The fist plows were solid and when you hit something you went over the steering wheel. IH came out with a spring trip blade they used on the Original and all the later NF Cubs. The blades are all the same but they have 3 different sub frames so you must get the correct sub frame. I have a spring trip blade for an Original which I will trade for the Non Trip as I won't use it but ant one since I'm in to Originals. The spring-trip blade for the Original also had a different main frame part as the lift rod in the Original runs through the frame. I'm located in PA.

[krochko]

so how do i find out what sub frame i need? I do not have one to trade but looking to buy? and i dont want to go head over heels over my wheel :0) thanks for that info. Is yours the whole package or just blade?
Mike

[Eugene]

Which model of Cub Cadet do you own?

As far as the two blades I have in Iowa. Transportation would be much more than the cost of the blades.

Eugene

[krochko]

I have a 1962 cub cadet narrow frame 7hr kholer
Mike

[wdeturck]

Mike: If you go to http://www.cngcoinc.com/parts-browse.asp you can see the parts break down of the spring-trip blade. Go To C&G link ans click on parts. On the rigth side click on the MODEL SEARCH and make sure the box below it is selected CUB CADET. That will take you to a long list on the right and click on ATTACHMENTS and another long list will appear. Scroll down(they are in numerical order) till you find 42", 54" PUSH BLADE-1 and click on it and a Box will open up. Upper right hand corner double click on 42", 54" PUSH BLADE-1. Should have the parts page for the spring trip blade(you may find a 54" blade that will work). Hope that helps but you will have to still find a blade for sale. You get stuck call me at 1-412-828-8072. I have the complete setup for an Orginal(1961-63)