This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Extra shift levers?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
BigBill
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Extra shift levers?
Ok i have a 10hp cub cadet model 100 it has a shift lever thats infront of the gear shifter and a small one near that one. Is that the creeper shift lever? Whats the smaller one do?
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
gitractorman
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Bill,
One is the shift lever for the creeper drive, and the smaller one is not a lever, rather it is a vent for the creeper drive gear case. The creeper drive gives you 3 gears plus reverse, below the speed of normal 1st gear.
It should look like this:
One is the shift lever for the creeper drive, and the smaller one is not a lever, rather it is a vent for the creeper drive gear case. The creeper drive gives you 3 gears plus reverse, below the speed of normal 1st gear.
It should look like this:
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Bill - what you should see is the creeper shift lever ahead of and on the left. What you see on the right should be the creeper drive housing breather.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
BigBill
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
With all the dirt on it i can't make out if its a breather or something is broken off. But the shifter with the knob moves freely in and out. The cub cadet must be a strong little bugger with the creeper? It has the snowblower attachment on it too. It has a drive shaft with u joints.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Who is online
Users browsing this forum: No registered users and 10 guests
