This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
NF shaft lift lever...gone!!!!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Findoggy
- 10+ Years
- Posts: 310
- Joined: Sun Nov 30, 2003 4:49 pm
- Location: Lehighton, PA
NF shaft lift lever...gone!!!!
Anyone with a NF 3pt hitch able to tell me the length, diameter, and hole placement on their Shaft lift lever? Seems I forgot to put a cotter pin back in one side and it vibrated it's way off my tractor. Figured I could just make one up, but I wanted it to be as close to original as possible. Thanks for the help. Findoggy
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
If you are talking about the round bar that fits in the upper casting of the 3 point hitch, it is 1" in diameter and about 8" long. I can measure one tomorrow. That piece actually came with the Brinly sleeve hitch adaptor or with the implement if it was one that did not require the adaptor such as the rear blade/rake combo with the IH name on it or the tillers. Rudy O who advertises reproduction Cub and Cuc Cadet parts on this site sells those pins in a couple different lengths and materials.
Who is online
Users browsing this forum: No registered users and 6 guests