This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
belt removal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Scott
- 10+ Years
- Posts: 1194
- Joined: Sun Dec 26, 2004 7:09 pm
- Zip Code: 02769
- eBay ID: scottdarowski
- Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112 - Location: MA, Rehoboth
- Contact:
belt removal
what is the easiest way to removed the drive belt from a CCO so it can be replaced?
On To Bigger Things-
wdeturck
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
http://ihregistry.com/manuals/op.php
Scott go here and download the serice and operator manuals and they have pictures of the belt replacement that requires the clutch to be removes. Not very hard but can't explain without pictures. Good luck
Scott go here and download the serice and operator manuals and they have pictures of the belt replacement that requires the clutch to be removes. Not very hard but can't explain without pictures. Good luck
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
-
jostev
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
- Contact:
personally, i would just take the engine off, it's only 4 bolts...
that's just my opinion
Johnny
that's just my opinion
Johnny
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
-
Scott
- 10+ Years
- Posts: 1194
- Joined: Sun Dec 26, 2004 7:09 pm
- Zip Code: 02769
- eBay ID: scottdarowski
- Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112 - Location: MA, Rehoboth
- Contact:
-
Leadfoot
- 10+ Years
Johnny:
There is no need to remove the bolts holding the engine. Loosening the 3 bolts holding the clutch bracket does the same thing....loosens the belt to remove it from the engine pulley.......however, the belt still connot be removed from the tractor!
Like Wm. said, it's hard to explain without pictures.
And once again, go to this site
http://www.binderbooks.com/
scale down the left side column, and click on 'IH Cub Cadet Tractors', and it will take you to a page that has EVERY manual you will/might need for any IH built Cub Cadet tractor or implements for the Cub Cadets.
Including this one:
Operators Manuals:
1014250 Cub Cadet Models 1961-1963 $14.95
this one,
Cub Cadet Service Manuals:
CSV-Orig-Set International Cub Cadet "Original" 1961-1963 (3 manual set) $29.95
and this one:
Parts Catalogs:
TC-SEC Sections are reprinted from the master parts catalogs, priced per model. Models available are as follows: Original $11.95
That is just the beginning!!!! They also have manuals for the 42" non-trip blade for the Original, the 42" trip blade for the Original, the 38" timed mower deck, and the Danco BB36 snowthrower.
There is no need to remove the bolts holding the engine. Loosening the 3 bolts holding the clutch bracket does the same thing....loosens the belt to remove it from the engine pulley.......however, the belt still connot be removed from the tractor!
Like Wm. said, it's hard to explain without pictures.
And once again, go to this site
http://www.binderbooks.com/
scale down the left side column, and click on 'IH Cub Cadet Tractors', and it will take you to a page that has EVERY manual you will/might need for any IH built Cub Cadet tractor or implements for the Cub Cadets.
Including this one:
Operators Manuals:
1014250 Cub Cadet Models 1961-1963 $14.95
this one,
Cub Cadet Service Manuals:
CSV-Orig-Set International Cub Cadet "Original" 1961-1963 (3 manual set) $29.95
and this one:
Parts Catalogs:
TC-SEC Sections are reprinted from the master parts catalogs, priced per model. Models available are as follows: Original $11.95
That is just the beginning!!!! They also have manuals for the 42" non-trip blade for the Original, the 42" trip blade for the Original, the 38" timed mower deck, and the Danco BB36 snowthrower.
-
Scott
- 10+ Years
- Posts: 1194
- Joined: Sun Dec 26, 2004 7:09 pm
- Zip Code: 02769
- eBay ID: scottdarowski
- Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112 - Location: MA, Rehoboth
- Contact:
-
jostev
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
- Contact:
sorry guys, i just totally forgot what i was saying, then i reread the question, i was waaay off 
i forgot about totally removing belt, i was just thinking to get pulley off....
sorry scotty
Johnny
i forgot about totally removing belt, i was just thinking to get pulley off....
sorry scotty
Johnny
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
Who is online
Users browsing this forum: No registered users and 5 guests
