This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

3 Pt

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Ritter107
10+ Years
10+ Years
Posts: 145
Joined: Mon Jan 02, 2006 2:52 am
Location: SW PA... US

3 Pt

Postby Ritter107 » Wed Apr 26, 2006 9:32 pm

has anybody ever tried to fabricate a 3pt out of steel? I know i saw a guy in wisconsin that sold them for a while. However, i missed out on that sale and i think i want to mount a tiller this year. So... i'm curious if anybody has tried to make one. It's probably not terribly complex, but then again, i better ask first. :P
In IH Cub Cadet I trust....

SPONSOR AD

Sponsor



Sponsor
 

User avatar
beaconlight
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Wed Apr 26, 2006 9:39 pm

Billyandmillie on the forum has made some.

bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

Paul B
10+ Years
10+ Years
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Postby Paul B » Thu Apr 27, 2006 7:30 am

beaconlight, I believe he is referring to what IH called a 3 point for a Cub Cadet, not a Cub.

Yes, I have seen some homemade 3 points - some that both looked and worked good, some that looked homemade. Your 107 will also require the upper mount bracket that the upper casting normally mounts in. That bracket is not used on the earlier narrow frames, and is not used on the wide frames, just on the 106,107, 126, 127, 147.

User avatar
wdeturck
10+ Years
10+ Years
Posts: 949
Joined: Mon Dec 08, 2003 6:15 am
Location: PA Oakmont 15139

Postby wdeturck » Thu Apr 27, 2006 8:58 am

I have also seen homemade ones and with 3 or 4 pieces of the correct size pipe and a welder it would be no problem. You only have to borrow one to get the correct angles. You also make the bracket if you got a heating torch.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.

Ritter107
10+ Years
10+ Years
Posts: 145
Joined: Mon Jan 02, 2006 2:52 am
Location: SW PA... US

Postby Ritter107 » Thu Apr 27, 2006 5:16 pm

I have all of the above... aside from the 3pt to borrow to get angles.... :cry:
In IH Cub Cadet I trust....

User avatar
wdeturck
10+ Years
10+ Years
Posts: 949
Joined: Mon Dec 08, 2003 6:15 am
Location: PA Oakmont 15139

Postby wdeturck » Thu Apr 27, 2006 8:12 pm

We will be waiting to see the finished product. I don't have one to lend you as I only have 2 Original 3 point hitches.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.

Ritter107
10+ Years
10+ Years
Posts: 145
Joined: Mon Jan 02, 2006 2:52 am
Location: SW PA... US

Postby Ritter107 » Thu Apr 27, 2006 9:26 pm

The day i got that NF hydraulic unit... i missed out on a 3 PT a few hours before off of the same tractor. :cry:
In IH Cub Cadet I trust....


Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 4 guests