Hi Guys as you may know I am building a lister diesel generator. Getting this 14hp single cylinder started is a bear.
I am thinking of going with starter generator. Being a belt drive it would be simple to setup. I do not know much about them so I am looking for ideals and sugestions. 5.118" Bore x 5.7" Stroke 17.5 to 1 Compression Ratio. The compression is not really a issue as I start it by hand and as long as it goes over the compression stroke it starts no matter how slow. It has four to six hundred pounds of flyheels get them spinning and flip off the compression relief.
If any one has one they think may work that you don't need let me know I will buy it if its not too much to see if it will work.
Thanks Billy
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Starter generator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
cowboy
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Starter generator
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
Who is online
Users browsing this forum: No registered users and 3 guests
