Hey, guys, I have a question. Will the clutch from a 126 fit a 147?
Thanks,
Steve H.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub Cadet Clutch
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Steve.43
- 10+ Years
- Posts: 392
- Joined: Sun Sep 05, 2004 7:48 pm
- Zip Code: 46992
- Tractors Owned: 1948 F Cub
1962 Cub LoBoy
Cub Cadets: SO76, 2 Originals, 70, 1650.
IH Trucks: '66 Scout 800. - Location: IN, Wabash
Cub Cadet Clutch
"If you need a tool and don't buy it, you will ultimately find that you have paid for it and don't have it."--Henry Ford
- wdeturck
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
Steve: The 126 is a gear drive which has a clutch and a 147 is a Hydro and doesnt have a clutch. If you mean the front PTO clutch that controls the deck they are the same. The rebuild kit is Part # 759-3490 and costs around $46 .
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
- Steve.43
- 10+ Years
- Posts: 392
- Joined: Sun Sep 05, 2004 7:48 pm
- Zip Code: 46992
- Tractors Owned: 1948 F Cub
1962 Cub LoBoy
Cub Cadets: SO76, 2 Originals, 70, 1650.
IH Trucks: '66 Scout 800. - Location: IN, Wabash
Cub Cadet Clutch
Hi, Geezer: I did mean the front PTO clutch. I went back and read my post and realized I hadn't made that clear. Thanks for the info and part no. I've got a used one from my 126 parts tractor, so if it's any good I'll be OK. Failing that, I'll go buy one at my local CC dealer.
Thanks for the info.
Steve H.
Thanks for the info.
Steve H.
"If you need a tool and don't buy it, you will ultimately find that you have paid for it and don't have it."--Henry Ford
Who is online
Users browsing this forum: No registered users and 7 guests