This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Changing Crankshaft Oil Seal on Kohler K321

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Changing Crankshaft Oil Seal on Kohler K321

Postby AL Farmall Boy » Mon Oct 17, 2022 9:30 am

I've got the Kohler K321 AQS engine on my CC 1450 stripped down and removed the flywheel to replace the crankshaft oil seal behind it. The oil seal on the PTO side of the engine is going to be easy to replace, but the one behind the flywheel I'm not so sure. Do you have to remove the bearing plate to replace the seal? I'm asking because I removed the stator and still don't see the oil seal visible with bearing plate on. I don't care to remove the bearing plate because of dealing with setting end play gap on crankshaft and getting that right. How bad a job is it?
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:
Top
  • Similar Topics
    Replies
    Views
    Last post

Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 1 guest