Front push blade

[bvfarmall]

Will a push blade from a 782 fit on a cub 127?

[radioguy41]

No, the 782 is a wide frame and the 127 is a narrow frame. Different mounting system.

[bvfarmall]

Thank you

[SONNY]

I put one from a cc 80 on my 147! had to modify things a bit but you can go wide to narrow if you can cut/weld/cuss!! lol!

[radioguy41]

The entire sub-frame would need to be refabricated. That's more than a "bit" of work. Since NF blades are fairly easy to find it begs the question, why?

[Stanton]

The entire sub-frame would need to be refabricated. That's more than a "bit" of work. Since NF blades are fairly easy to find it begs the question, why?

Save yourself the the frustration!

[SONNY]

I did it cause they said it couldnt be done!!!!!!!!!!!!! Best mod I ever done!

[NJ Farmer]

Just like trucking Coors beer across the Mississippi……that’s bootlegging and that’s against the law….

Great movie!

NJ Farmer

[radioguy41]

I did it cause they said it couldnt be done!!!!!!!!!!!!! Best mod I ever done!

Post some pics. I'm interested to see how you changed
this mount/subframe (longer curved arms that connect inside the frame at the rear, wider spaced pins faced outwards)>

to this mount/subframe (shorter straight arms that connect outside the frame at the rear, narrow spaced pins faced inward).

[SONNY]

Will get a couple pics. gotta move some tillers to get over to it in the shed!

[SONNY]

Finally got some pix of my 80 to 147 blade mount.