This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub cadet 1200 reaches new heights
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Cub cadet 1200 reaches new heights
Anti gravity
Is that a IH approved method of lifting?
Sure balances nice!
1968 Cub Fast-Hitch
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: Cub cadet 1200 reaches new heights
Got this baby to fire off yesterday, I had to clean up the point contact surfaces and use a jumper wire to the coil.
Gonna have to chase down the wire hack job.
Someone added a (chinese junk) push button starter switch. (I imagine to bypass a faulty clutch safety switch)
I think it woulda been easier to replace the clutch pedal safety switch than to go through all the trouble they did!!!
Gonna have to chase down the wire hack job.
Someone added a (chinese junk) push button starter switch. (I imagine to bypass a faulty clutch safety switch)
I think it woulda been easier to replace the clutch pedal safety switch than to go through all the trouble they did!!!
1968 Cub Fast-Hitch
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Cub cadet 1200 reaches new heights
Some of these had a switch on the seat, a switch on the pto lever, a switch on the brake to interrupt the power to the coil I’m not sure which one you have there,
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: Cub cadet 1200 reaches new heights
I found the wiring schematic in the manuals section.
This one has the safety switch on the clutch pedal.
No seat switch!
The pto is electric!
This one has the safety switch on the clutch pedal.
No seat switch!
The pto is electric!
1968 Cub Fast-Hitch
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: Cub cadet 1200 reaches new heights
Well....... I removed the (generic toggle) aftermarket pto switch with its direct to the battery wire and put the original pto switch back where it was supposed to go.
Hooked the ground for the hour meter back up. It works, but the sun damaged the plastic lens and it is all blurry.
Got it back where the key will start it!
Dang thing will not run without a battery though!
Charges 14v, but will not stay lit when I remove the jumper cables!
I was hoping to take it for a ride!
Hooked the ground for the hour meter back up. It works, but the sun damaged the plastic lens and it is all blurry.
Got it back where the key will start it!
Dang thing will not run without a battery though!
Charges 14v, but will not stay lit when I remove the jumper cables!
I was hoping to take it for a ride!
1968 Cub Fast-Hitch
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Cub cadet 1200 reaches new heights
My cc1200 just died after about 12 years on a used 12 hp aqs engine. At the time when I first bought it had a broken con rod, blown clutch. We tore it down, new clutch assembly, changed the 3/4” front axles to 1” axles. Installed the used 12 hp Kohler. Cleaned the 44 c mower deck. It’s been faithful like the family dog. I have a 14 hp aqs with a creeper that’s going next into it, my point is these are worth fixing up.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: Cub cadet 1200 reaches new heights
BigBill wrote:My cc1200 just died after about 12 years on a used 12 hp aqs engine. At the time when I first bought it had a broken con rod, blown clutch. We tore it down, new clutch assembly, changed the 3/4” front axles to 1” axles. Installed the used 12 hp Kohler. Cleaned the 44 c mower deck. It’s been faithful like the family dog. I have a 14 hp aqs with a creeper that’s going next into it, my point is these are worth fixing up.
Forgive me, but what is aqs?
1968 Cub Fast-Hitch
-
- 10+ Years
- Posts: 1431
- Joined: Fri Jan 25, 2008 9:02 am
- Zip Code: 00000
- Circle of Safety: Y
Re: Cub cadet 1200 reaches new heights
I think the Kohler AQS engines used a gear drive starter on the flywheel vs a belt driven starter/generator.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Cub cadet 1200 reaches new heights
Geared starter, bigger flywheel, I believe a larger carb, larger fan housing, electric pto, the air cleaner housing is fed from the flywheel housing per hose. Wide frame cadet.
AQS quietline engine, the cadet has side panels.
AQS quietline engine, the cadet has side panels.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: Cub cadet 1200 reaches new heights
Sounds like what I have!
Except I do not have the side panels!
Except I do not have the side panels!
1968 Cub Fast-Hitch
-
- Similar Topics
- Replies
- Views
- Last post
-
-
My First Cub Cadet. 1982 Cub Cadet 1282 Attachment(s)
by AntiqueTractorFan » Thu Jan 26, 2023 10:25 pm » in Cub Cadet - 0
- 1299
-
by AntiqueTractorFan
Thu Jan 26, 2023 10:25 pm
-
-
- 6
- 79
-
by IHCubCadet147
Tue May 14, 2024 1:59 pm
-
- 3
- 1454
-
by 790rivers
Tue Jun 22, 2021 1:50 pm
-
- 16
- 2628
-
by BigBill
Sun Jul 18, 2021 11:47 pm
-
- 1
- 558
-
by BigBill
Sat May 22, 2021 11:03 pm
Who is online
Users browsing this forum: No registered users and 0 guests