This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1450 quit
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
1450 quit
Mowing along with 1450 and all of a sudden dies and won't start, got fuel in tank fire to the plug what else?
Jim Turner
-
Eugene
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
Re: 1450 quit
found the problem I had intermitting fire so found out bad ign switch one of the terminals just broke of. looks like a bear to change.
Jim Turner
-
BigBill
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 1450 quit
To get easy access to the ign switch remove the gas tank and fire wall. Remove the throttle and choke cables.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
Re: 1450 quit
got her fixed, but now it isn't charging when I first started it up with new ign switch the amp hand went to full charge then I revved it up and it quit charging, what now?
Jim Turner
-
Eugene
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
Re: 1450 quit
the switch is a simple plug and play and it is keyed you can't plug it in wrong
so probably rectifier
so probably rectifier
Jim Turner
-
Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: 1450 quit
Jim, the plug at my rectifier on my CC 782 (KT-17 series II) was loose; battery not charging. Had to do some bending of prongs to get them to stay in place.
Hope that’s all it is.
Hope that’s all it is.
Stanton
-
BigBill
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 1450 quit
My cadet doesn’t charge all the time. It stays in the middle on zero. Are you sure it’s not charging? Is it going negative on the needle?
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
Re: 1450 quit
Bill when I turn the tiller on it goes negative and plus it runs the battery down it is a new battery
Jim Turner
Who is online
Users browsing this forum: No registered users and 9 guests
