My 1964 Farmall Cub with 54-A Blade.

A few pictures of my Spec-Cast 1964 Farmall Cub Square Nose with my own homemade Cub 54-A Grader Blade.

a few close ups

Nice job. Is it metal, plastic, or both?

Bob

Bob McCarty":3lrnie6b said:

Nice job. Is it metal, plastic, or both?

Bob

Click to expand...

the frame is two pieces of wood the blade is three pieces of cardboard glued together an the front lift arm is from the snow blade this cub came with that i took apart an used an took a thick piece of wire i glued to the top of the arm then i used a thin piece of wire an wrapped around five times an glued it all together an painted it with some cheap spray paint.

Cool