Does anyone have the head bolt torque sequence for a Farmall MD? I looked all through the service and operators manuals but it is not listed anywhere.
It gives the torque spec as 110 ft. lbs. but that is it.
Or do I just start in the middle and work out in a circular pattern in multiple steps?
Thanks in advance for any help.
Jeff
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
MD head torque sequence.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 255
- Joined: Mon Feb 03, 2003 2:00 pm
- Zip Code: 54235
- Circle of Safety: Y
- Location: WI Sturgeon Bay
MD head torque sequence.
49 Farmall Cub, 68 I-H Cub LoBoy
53 Farmall Super-A, 44 Farmall B
52 Farmall Super-C, 41 Farmall H
40 Farmall M, 46 Farmall M
51 Farmall MD, 54 Case 500 Diesel
71 Allis-Chalmers 160 Diesel
53 Farmall Super-A, 44 Farmall B
52 Farmall Super-C, 41 Farmall H
40 Farmall M, 46 Farmall M
51 Farmall MD, 54 Case 500 Diesel
71 Allis-Chalmers 160 Diesel
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: MD head torque sequence.
Start in th middle and work out , i set the torque at 30 torque all the keep going up that way you keep thepressure constant alll over going up 20 to 30 each passtoo reach the specified torque.
hope this helps
Phil
hope this helps
Phil
"Work Hard ,Play Often,Care Always"
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 0 guests