This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Drawbar thickness??
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Jeff D. N.E. Wis.
- 10+ Years
- Posts: 255
- Joined: Mon Feb 03, 2003 2:00 pm
- Zip Code: 54235
- Circle of Safety: Y
- Location: WI Sturgeon Bay
Drawbar thickness??
What is the correct thickness for the swinging drawbar on a M/MD? Is it 3/4' or 1". The one that is on our 1951 Farmall MD is 3/4". It is all welded & buggered up so I am looking for a better one. The swivel/mounting point for it looks like it would accept a 1" bar. Thanks.
49 Farmall Cub, 68 I-H Cub LoBoy
53 Farmall Super-A, 44 Farmall B
52 Farmall Super-C, 41 Farmall H
40 Farmall M, 46 Farmall M
51 Farmall MD, 54 Case 500 Diesel
71 Allis-Chalmers 160 Diesel
53 Farmall Super-A, 44 Farmall B
52 Farmall Super-C, 41 Farmall H
40 Farmall M, 46 Farmall M
51 Farmall MD, 54 Case 500 Diesel
71 Allis-Chalmers 160 Diesel
-
DanR
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: Drawbar thickness??
1" is correct. The 3/4" is probably from an H.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 3 guests
