Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Mon Feb 21, 2011 9:56 pm
I have a 1946 Farmall M that I will be overhauling soon and am starting to line up an overhaul kit, will send block to machine shop for machine work on it, boiling, magnafluxing ETC. Will the stepped pistons fit it without any modifications to the head ? I assume the stepped will give more HP, is that a correct assumption ?
Thanks for your help
Tue Mar 22, 2011 11:50 am
The 1940 M we just finished up has 4.00 " stepped head pistons in it, It has a 1945 head on it ,( why I can only guess ,) just check the top of the head to be sure it has clearance in there. we had no problem , got the sleeves and pistons from Yesterdays tractor. Went in nice.
Any questions I will be glad to help out, since this M is still fresh in my memory, Will e-mail you some pic of our M engine.
Hope it helps
Tue Mar 22, 2011 8:10 pm
I appreciate the reply.
Fri Mar 25, 2011 8:49 am
fyi, if you haven't done one before
the M is a dry sleeve engine. a sleeve puller with the correct adapter is the easiest way to remove them. i made mine and have the machine shop make the adapters as i need them.
to reinstall the sleeves, heat the block on a furniture dolley with a torpedo heater and freeze the sleeves. drive them home with a couple blocks of wood and a hammer. the furniture dolley is so you can rotate the block to heat it evenly.
or have the shop do it.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.