Page 1 of 1

M

Posted: Mon Nov 29, 2010 8:45 am
by DanR
Does anyone have a picture of the radiator shutter linkage on an M? Thanks

Re: M

Posted: Mon Nov 29, 2010 10:35 am
by Mr E
DanR wrote:Does anyone have a picture of the radiator shutter linkage on an M? Thanks


Dan, I have an H with shutters. Do you know if the linkage is similar? If so, I'll be happy to get you some pictures of that.

Re: M

Posted: Mon Nov 29, 2010 7:20 pm
by dirtyred
which end do you need a pic of?

Re: M

Posted: Tue Nov 30, 2010 8:02 am
by DanR
I think I have it figured out. Problem was every piece is bent, broken, or modified. This application is not typical IH. Things like cotter pins backwards and moving the water pump because one piece is 1/8" too long. Must have been engineered by someone from the other side.

Re: M

Posted: Wed Dec 01, 2010 9:15 am
by Phillip W. Lenke
Dan
I have a shutter stystem on our M.
Let me know what you need,
Phil

Re: M

Posted: Wed Dec 01, 2010 9:29 am
by DanR
Thanks Phil, I'm going to make a new long rod today. The old one has too many bends to be straightened properly. I'll know better after I get that in.

Re: M

Posted: Wed Dec 01, 2010 10:57 am
by Phillip W. Lenke
Just a heads up it has a drop of 3 inches and an offset of 1 inch.
5/16 rod
The travel for the threads is 3/4 inch to open and shut the shutters.
Things i have found to make the new offset rod that attaches to the crank
Phil

Re: M

Posted: Thu Dec 02, 2010 7:43 am
by DanR
Yikes! Glad I found out before I did anything.