Well , we are really into the M now. I was removing the left rear axle, heavy but removed well, bearings seemed great, wanted to replace all gaskets and seals. however while cleaning I found 2 pieces of bearing cages that were broken off somewhere so I had to remove the axle from the hsg, I found that the bearings were replaced and the old parts have been rolling around in there. I have to re-torque the bearing retainer , would like to get the specs if anyone has a good manual, I bought one but really a poor IT manual.
Phil
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
M Axle bearing retainer torque specs
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
M Axle bearing retainer torque specs
"Work Hard ,Play Often,Care Always"
-
- 10+ Years
- Posts: 1607
- Joined: Sat Jun 03, 2006 8:09 am
- Zip Code: 45387
- Location: Yellow Springs, Ohio
Re: M Axle bearing retainer torque specs
Well, No help with the bearing retainer, sorry.... But I'll ask around and see if any of the local farmers might.
However, sure would like to know how that engine is coming along.....Hint Hint....Thought we'd be seeing some pics by now.
However, sure would like to know how that engine is coming along.....Hint Hint....Thought we'd be seeing some pics by now.
Mike Duncan
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 1345
-
by Plywud
Mon May 24, 2021 11:26 pm
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 0 guests