I removed the steering knuckle universal joint SHOT , the PO did not have a grease fitting in, does it matter which side the fitting fits on ,front side or back side of the joint, is it a 90 degree Fitting? Also ,with the steering straight , the Knuckle that attaches to the second rod towards the front bolster, bolt up? and Key down .
Could someone look at there M and report back
I hope to get this together asap
Phil
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
FArmall M steering Universal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
FArmall M steering Universal
"Work Hard ,Play Often,Care Always"
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: FArmall M steering Universal
got the knuckle orientation worked out , need info on the grease fitting towards the steering wheel or bolster.
I know it may or may not matter, am not sure if it will hit the knuckles if it is on the wrong side
Phil
I know it may or may not matter, am not sure if it will hit the knuckles if it is on the wrong side
Phil
"Work Hard ,Play Often,Care Always"
- SONNY
- 10+ Years
- Posts: 4107
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: FArmall M steering Universal
I would line it up with the little hole in the hood so the grease gun will go on with the hood on it. that is the way my H is set up! thanks; sonny
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: FArmall M steering Universal
I know the bushing fitting is visible from the hood the knuckle sets in a bit , My main concern is it possibly hitting the knuckle part. , I looked at a super M last evening, it was like our original no fitting , just a through hole.
Any help please
Phil
Any help please
Phil
"Work Hard ,Play Often,Care Always"
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: FArmall M steering Universal
Figured it out on my own. The fitting goes in t he cast knuckle,will hit the front shaft side walls. Will be able to move the fitting around after I get it mounted for ease of greasing.
"Work Hard ,Play Often,Care Always"
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 2 guests