Timing of the internal gears, how do you know the proper meshing for timing, there are some small letters on the top of the drive that the rotor fits over, and a line carried down the side,it is off a 1940 farmall M distillate.
Thanks Phil
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
H4 mag timing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
H4 mag timing
"Work Hard ,Play Often,Care Always"
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
Re: H4 mag timing
PWL wrote:Timing of the internal gears, how do you know the proper meshing for timing, there are some small letters on the top of the drive that the rotor fits over, and a line carried down the side,it is off a 1940 farmall M distillate.
Thanks Phil
Phil,
The letters are R and L. Which one you use will depend on the rotation of the drive. You may borrow my mag manual some time after I'm back from surgery. I'm expection it to be at least a week.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: H4 mag timing
Thanks George:
On the drive gear ,there is a small cut out lower than the rest, I am assuming that is the reference for alignment,right?
Also, Please make sure Marilyn gives me a call to let Marlee out ,if needed. anything you guy's need while you are recouping, let me know.
Phil
On the drive gear ,there is a small cut out lower than the rest, I am assuming that is the reference for alignment,right?
Also, Please make sure Marilyn gives me a call to let Marlee out ,if needed. anything you guy's need while you are recouping, let me know.
Phil
"Work Hard ,Play Often,Care Always"
-
- 10+ Years
- Posts: 5886
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
Re: H4 mag timing
Working on the new play toy all ready!!! George good to see ya posting.Kevin
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 0 guests