BN not firing up

Mon Jun 04, 2007 7:09 am

Well, Have our BN sharp looking . runs fabulous, that is until about 2 weeks ago. a fellow came over with my Brother to look at our tractors. He asked do they run as good as they look , I said with pride Better! My mistake, well the cub fired right up. BN usually, about a hit on the starter and fires right up. Not this time cranked and cranked. Gas dripping from carb. etc you know the drill. The fellow said that's OK don't have to hear it run. But what he did'nt know is, that, I did!
So I started with the plugs ,always looked great , but were severly carboned up, I replaced them, started, but with difficulty. Plugs were wet , so I decided to check the spark. NONE, My brother mentioned that the points could be out . Well Saturday I checked the points they were in At .009-.010 supposed to be .013 , Moved them out. Cleaned the contact areas, reassmbled . Fired right up .
Now if I can get that guy back out!
Phil

Mon Jun 04, 2007 7:26 am

Old tractors share something in common with modern day computers. That is, they are aware of critical times and thus choose those times to fail. It is the nature of the beast! :? :? :? :D