This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
PTO belt pulley
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Star
- Posts: 108
- Joined: Sun Dec 27, 2020 10:48 am
- Zip Code: 67357
PTO belt pulley
I have removed the bolt on my “b” belt drum and am wondering the best way to pull off the drum so I can replace the seal that is leaking.
Your advice is much appreciated….. Thanks in advance
for your help.
-
- Team Cub
- Posts: 17290
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: PTO belt pulley
It should pull right off, no puller required. I guess if it wants to fight, you can put the bolt back in (loose) and use a puller against the bolt and hooked to the hub.
-
- Cub Star
- Posts: 108
- Joined: Sun Dec 27, 2020 10:48 am
- Zip Code: 67357
Re: PTO belt pulley
Thanks. I thought I could use a puller but wanted to make sure there wasn’t an easier way. Thanks so much Jim.
Who is online
Users browsing this forum: No registered users and 0 guests