This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

BN Crank shaft pulley

Farmall B & BN Tractors, 1939-1947
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Phillip W. Lenke
10+ Years
10+ Years
Posts: 1484
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

BN Crank shaft pulley

Postby Phillip W. Lenke » Fri Nov 11, 2005 7:49 am

I removed the main Pulley the other day. Noticed a groove around the area that rides on the seal . It is concentric about .005 deep, is this right or is it suppose to be staight all the way out. Do I need to weld and turn on the lathe?
"Work Hard ,Play Often,Care Always"

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Chris Todd
10+ Years
10+ Years
Posts: 713
Joined: Sun Feb 02, 2003 8:15 pm
Zip Code: 43701
Tractors Owned: 1955 Farmall Cub
1947 Farmall Circle Cub
1973 Int. 474
Location: OH, Zanesville

Postby Chris Todd » Fri Nov 11, 2005 8:04 am

I imagine you can get a "Speedi Sleeve" from local NAPA that is driven over the grooved shaft. Chicago Rawhide is who produced the sleeve I used on my Cub. Hope this helps.

Phillip W. Lenke
10+ Years
10+ Years
Posts: 1484
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Postby Phillip W. Lenke » Fri Nov 11, 2005 8:34 am

Never heard of this, what is it.
Thanks
"Work Hard ,Play Often,Care Always"

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Fri Nov 11, 2005 8:49 am

a
speedi sleeve is a replacement sleeve that goes ocer the shaft to cover the worn area. it then uses a slightly different oil sal. Napa will need to know the part number of your original seal, to match it. check with your local IH dealer, cub front main seals come with the sleeve, one for your BN may also.
If you are not part of the solution,
you are part of the problem!!!

Jim Becker
Team Cub
Team Cub
Posts: 17240
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Fri Nov 11, 2005 10:01 am

The BN should use the same seal as the Cub. Get one from your CaseIH dealer with the sleeve.


Return to “Farmall B & BN”

Who is online

Users browsing this forum: No registered users and 1 guest