Page 1 of 1
Farmall H Hand Crank
Posted: Thu Nov 07, 2013 10:24 am
by Stanton
My H didn't come with a hand crank, so am thinking about making one.
Does anyone have the dimensions (diameter rod, overall length and offset distance of handle)?
Any help is appreciated.
Re: Farmall H Hand Crank
Posted: Thu Nov 07, 2013 5:04 pm
by Rick Spivey
I'll try and make pics + measurements of mine this weekend, but it will be Sunday night before I could post back. I assume yours fits the small rod that protrudes out the front of the radiator bolster.
Re: Farmall H Hand Crank
Posted: Thu Nov 07, 2013 5:24 pm
by Don McCombs
Stanton,
Look at item IHS546 on the Steiner web site. Click the Specifications tab. There's some information there that will be helpful.
Re: Farmall H Hand Crank
Posted: Sat Nov 09, 2013 2:21 pm
by Stanton
Don McCombs wrote:Stanton,
Look at item IHS546 on the Steiner web site. Click the Specifications tab. There's some information there that will be helpful.
Thanks, Don; missed that tab. Looks like 17" to the first bend and 7/8" diameter rod. By my guestimation of the Steiner's pic, the drop is a little more than half of the length, so that'll make about a 9"-10" drop.