I have a 1948 or so H that needs carb work
(am familiar with r&r 'g cub carbs)
purchased a kit from steiner
what I know isthat it is a 1" updraft,
the IH manual gives me a measurement for float level
and fuel level in the bowl, but would like some additional
info tips to rebuild
??? Blue ribbon service manual available??
Howard
Farmall H carbuerator
Moderator: Team Cub
2 posts
• Page 1 of 1
Farmall H carbuerator
by howhow1 » Fri Feb 01, 2013 5:56 pm
"Everyone here brings us happiness . . .
some when they arrive and some when they leave"
some when they arrive and some when they leave"
- howhow1
- Cub Star!!
- Posts: 285
- Joined: Sun Apr 26, 2009 10:28 pm
- Location: Gasport, NY
- Zip Code: 14067
- Tractors Owned: 52 cub "Big Ed" FH
52 cub "Loader cub" IH 1000 Loader FH
54 cub "#3"
multiple implements
42 Farmall H
Re: Farmall H carbuerator
by Matt Kirsch » Fri Feb 08, 2013 3:01 pm
The skills and techniques are pretty much the same as a Cub carburetor only larger.
Only thing to be careful of is getting the carb and governor connected properly. There is a tooth that lines up with a notch. If you miss that the tractor either won't rev up or engine will run away on you, depending on which side you miss by.
Only thing to be careful of is getting the carb and governor connected properly. There is a tooth that lines up with a notch. If you miss that the tractor either won't rev up or engine will run away on you, depending on which side you miss by.
- Matt Kirsch
- 501 Club
- Posts: 2982
- Joined: Tue Jun 08, 2004 3:04 pm
- Location: Rochester, NY
- Zip Code: 00000
- Circle of Safety: Y
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
|
|