Page 1 of 1
H oil filter ?
Posted: Tue Feb 05, 2008 5:50 pm
by john2189
whqt is the napa number ?
Posted: Tue Feb 05, 2008 7:04 pm
by jostev
there are two different filters for the H's... one is taller and not as big around if I remember right, I cant' remember for sure, been a while since I ordered one...
Johnny
Posted: Fri Feb 08, 2008 6:22 pm
by KETCHAM
My 1950 H takes #1172.And yes there are 2 differnt ones.I don't remember the other Number!!Kevin
Posted: Fri Feb 08, 2008 9:22 pm
by LiL' Red
KETCHAM wrote:My 1950 H takes #1172.And yes there are 2 differnt ones.I don't remember the other Number!!Kevin
That would be the number for the short one, later version.
Posted: Fri Feb 08, 2008 9:43 pm
by LiL' Red
Just checked the tall one[7.5 as opposed to 5.50] would be 1125.
Posted: Sat Feb 09, 2008 12:35 am
by john2189
LiL' Red wrote:Just checked the tall one[7.5 as opposed to 5.50] would be 1125.
Would the taller one give me more oil pressure ?
Posted: Sat Feb 09, 2008 9:48 am
by KETCHAM
I don't think it would filter correctly.Kevin
Posted: Sat Feb 09, 2008 1:11 pm
by Jim Becker
The correct filter element is determined by which cover/bolt is on the tractor. If all else is in proper working order, oil pressure won't be changed by which filter is used.
Filter
Posted: Tue Feb 12, 2008 12:00 am
by ihredo4
On the W-4/H series the tall oil filter is for the early models. The '39 and '40 models maybe a little longer. I'll have to check my parts books