Page 1 of 1
Loading rear tires on "H"
Posted: Wed Nov 08, 2006 5:32 pm
by 99roushford
Hi, Lost the chloride out of one of my "H" tires. Got a new tube used rim and changed and remounted the tire. Was wondering if anyone could give me a gestament on how much chloride it will take to reload it 2/3's full like the owners manual recommends.
Thanks for your time and have a great day.
Moe
Posted: Wed Nov 08, 2006 6:23 pm
by parts man
An 11-38 0r 12-38 tire will take just about 40-45 gallons of fluid.
Posted: Fri Nov 10, 2006 7:52 pm
by moparado
This is new to me! Whats with chloride in tractor tires all about? Why not just use good ol air?
Posted: Fri Nov 10, 2006 8:51 pm
by jakeesspoo
WEIGHT
Posted: Sat Nov 11, 2006 12:12 pm
by artc
40 gallons at 7.x lbs per gallon is 300 lbs in each tire. it's an easy, initially inexpensive way to add more than 2 sets of weights to a tractor.
the down side....the rim tends to rot out near the valve stem.
Posted: Sat Nov 11, 2006 1:25 pm
by George Willer
artc wrote:40 gallons at 7.x lbs per gallon is 300 lbs in each tire. it's an easy, initially inexpensive way to add more than 2 sets of weights to a tractor.
the down side....the rim tends to rot out near the valve stem.
Art,
A gallon of water will weigh about 8.3#
plus the weight of the dissolved calcium which doesn't increase volume.
Posted: Sat Nov 11, 2006 10:51 pm
by Jim Becker
An 11-38 tire holds 42 gallons when filled to the (typical) 75% level. That adds 351#. 2# of CaCl in a gallon of water lowers the freezing point to -23 degrees F. 38 gallons of that solution weighs 398#.
(I know that a liquid doesn't expand when something is dissolved in it. But for some reason, they change the # of gallons for a 75% fill of the solution.)
Posted: Sun Nov 12, 2006 7:59 pm
by 400lbsonacubseatspring
George Willer wrote:A gallon of water will weigh about 8.3# plus the weight of the dissolved calcium which doesn't increase volume.
Actually, George, the volume does increase ever so slightly.....nothing that you'd notice in a 5 gallon bucket, but it might add an inch or so in a 55 gallon drum...........
Posted: Tue Nov 14, 2006 6:54 pm
by 99roushford
Hi guys, thanks for the help. I just got in from deer camp to take a shower before heading back in and just read your replies. I have been told $1.50 a gal. for chloride plus $55.00 a hr. from the only tire dealer in our area who does road service. Since my other rim is bad also I am going to have him pump that one before changing it. The one I lost the chloride out of I did my self.
Moe
Posted: Tue Nov 14, 2006 8:59 pm
by moparado
Weight hugh! Seems to me a chloride solution would be corrosive to the rims. Why not just use an automotive anti-freeze with water.
Posted: Wed Nov 15, 2006 6:41 pm
by 99roushford
Hi, 40 gal.for chloride at $1.50 a gal. is $60.00. The $55.00 a hr.I have to pay for there time regardless what they use to load it with. Some people who can afford It do use antifreeze but where I live a 50/50 mixture costs $6.00 a gal . We are talking $240.00 just for the mixture!!!! way over my head. That is more then I paid for the two rims. You are right It will rust out the rims but I will be long gone before I need to worry about that again.
Moe