This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Engine install
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 732
- Joined: Sun Mar 14, 2004 10:00 pm
- Zip Code: 70403
- Location: LA, Hammond
Engine install
I've had a Farmall H on steel wheels for a few years that I got from a good friend in Kentucky. The tractor was fairly complete but the engine was disassembled, in a crate. The block was pretty rough and I thought about restoring the tractor, but decided against it to focus on another tractor in better shape.However, I want to put the tractor back together for display in my yard....my question is can the engine be installed back in the frame without removing the front end and the rails?
-
- 10+ Years
- Posts: 523
- Joined: Fri Feb 11, 2011 6:06 pm
- Zip Code: 62995
- Tractors Owned: 1951 Farmall Cub
1950 John Deere A
1949 Farmall Cub
1943 Farmall H
1940 Farmall H
1953 Farmall Super M
1962 Massey Ferguson 65 - Circle of Safety: Y
- Location: Southern Illinois
Re: Engine install
If the engine rear plate is still bolted to the bell housing it is possible.
USAF 1976 - 1996
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 1 guest