Flushing 300 Radiator

Farmall H, HV & Super H, 300 & 350, 1939-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
ShawnAgne
501 Club
501 Club
Posts: 638
Joined: Sat May 07, 2016 5:13 pm
Zip Code: 45380
Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
Circle of Safety: Y
Location: Versailles, Ohio

Flushing 300 Radiator

Postby ShawnAgne » Fri Mar 20, 2020 5:49 pm

Is it possible to flush the 300 radiator without removing it? Have never changed the coolant in 3 years that I have had it and had to add some as it ran low and started running a little hot during winter. Thought might be good to flush it. If so just open top cap and where it drains and run a hose?
Shawn Agne

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 14293
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Flushing 300 Radiator

Postby Don McCombs » Fri Mar 20, 2020 6:00 pm

I would use the same technique described in the Cub Operator's Manual using a radiator flush preparation or washing soda. Plain water won't do much for built-up deposits.
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39
Circle of Safety

tst
10+ Years
10+ Years
Posts: 3532
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: Flushing 300 Radiator

Postby tst » Fri Mar 20, 2020 7:21 pm

that engine may have plugs in it also, pull the blocks so you can get the crap out of the block


Return to “Farmall H, HV, Super H, 300 & 350”

Who is online

Users browsing this forum: No registered users and 1 guest