Page 1 of 1

straight a plow id help

Posted: Thu Jul 29, 2010 4:13 pm
by t jackson
i need help in the id of a 1 bottom plow for an a it is not a a-91 it does have 1 spring from the front of the beam to the front does anyone have pics of a a-92 or a-191 jim becker can you help thanks

Re: straight a plow id help

Posted: Thu Jul 29, 2010 5:52 pm
by Jim Becker
I might be able to help if you can post a picture of what you have.

Re: straight a plow id help

Posted: Fri Jul 30, 2010 5:21 pm
by t jackson
at this time i can't post pics i have the a-91 manual and it is not that one and i'm missing some parts could you please send me pics of the a-92 and maybe 1 or 2 others there is 1 spring on the front of the beam and a v with the 2 arms hooking to the front 1 lever bolting to the right front pad hope this helps thanks jim

Re: straight a plow id help

Posted: Fri Jul 30, 2010 6:43 pm
by Rudi
TJ:

If you have some pics, email them to me and I will post em

Re: straight a plow id help

Posted: Fri Jul 30, 2010 8:10 pm
by t jackson
no camera

Re: straight a plow id help

Posted: Fri Jul 30, 2010 9:01 pm
by Boss Hog
I do not have a pic of one Tom if I did I would post it for you maybe some one will post one before long
Boss

Re: straight a plow id help

Posted: Fri Jul 30, 2010 9:05 pm
by t jackson
thanks to all who can help

Re: straight a plow id help

Posted: Fri Jul 30, 2010 9:10 pm
by Jim Becker
I don't have pictures of the possibilities either. I'd have to try to find something in a manual. If I did, then I'd have to scan it. The pictures I have don't really show the differences. The A-192 evidently came with the spring. I don't know if any came on the A-92 but there was a package to backfit the spring onto both the A-91 and A-92. The tilt on the rear rockshaft of the A-91 requires a wrench. The other two had a crank adjust.