This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Farmall 200

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Paul B
10+ Years
10+ Years
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Farmall 200

Postby Paul B » Mon Apr 13, 2009 4:51 pm

Can someone tell me what the Owners/Operator Manual specifies to use as the lubricant in the transmission/rear-end of a Farmall 200, and the quanity. Thanks in advance.

SPONSOR AD

Sponsor



Sponsor
 

Jim Becker
Team Cub
Team Cub
Posts: 17242
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Farmall 200

Postby Jim Becker » Mon Apr 13, 2009 10:05 pm

I don't have a reference for the 200. It was in the middle of the succession of similar models C - Super C - 200 - 230 - 240 - 404. The early ones would have been factory filled with SAE 90 gear oil and the later ones with Hy-Tran. I don't know whether the switch was done by the time the 200 came along. Since the 200's Touch-Control had a separate reservoir, the transmission would be OK with either type. For the 240, the book calls out 4 3/4 gallons of Hy-Tran without PTO/pulley, 5 gallons with. The 200 would have to be close to the same. The level plug is on the right side, at the very rear.


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 9 guests