This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Tractor cab edge molding source?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Tractor cab edge molding source?
I'm restoring a 240 Utility that has a Sims cab. Where the (vertical) front of the cab meets the tractor's (horizontal) hood there is a length of rubber edge molding separating them, and it needs to be replaced. It looks like a 1/2 inch diameter thick walled tube that is slit along it's length, that fits snugly onto the vertical cab bracket. It's very visible so I'd like to find a manufactured piece. Does anyone have any suggestions of where I could buy something like that? McMaster-Carr has an extensive selection of edge moldings they sell by the foot, but unfortunately nothing similar. Thanks.
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
-
- Team Cub
- Posts: 17310
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Don't know if they have what you want, but I'd start here:
http://www.steelerubber.com
Go to their on-line catalog then look at "Street Rod Extrusions".
Here is another (never saw their products):
http://www.metrommp.com/
Go to "Universal Parts" then look at "U-Channels".
If you have someone locally that does street rod work, they can probably help you out.
http://www.steelerubber.com
Go to their on-line catalog then look at "Street Rod Extrusions".
Here is another (never saw their products):
http://www.metrommp.com/
Go to "Universal Parts" then look at "U-Channels".
If you have someone locally that does street rod work, they can probably help you out.
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Thanks Jim
I'll give them a call.
Paul
I'll give them a call.
Paul
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 1 guest