This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

dual cylinder 3 point

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
Hairy Moose Knuckles
10+ Years
10+ Years
Posts: 270
Joined: Sun Feb 17, 2008 12:32 pm
Zip Code: 00000
Tractors Owned: 1951 Super C

dual cylinder 3 point

Postby Hairy Moose Knuckles » Fri Feb 22, 2008 12:10 am

I need to ask someone who knows what this would be worth. Is this worth 500.00 It sounded a lil high to me, but it might not be as I have no Idea.

Image
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
Joe Malinowski
10+ Years
10+ Years
Posts: 2385
Joined: Sat Feb 07, 2004 3:03 pm
Zip Code: 01035
eBay ID: jayrod01035
Tractors Owned: 1975 F cub, 1965 F cub, 1949 parts cub,1953 F cub 1942 JD LA, 1988 JD 330 diesel
Circle of Safety: Y
Location: MA. Hadley

whats it for

Postby Joe Malinowski » Fri Feb 22, 2008 5:56 am

What does it go on? I think its right in the price range of what hitches go for.
Joe
22 mower 5', grader blade, 189 two way moldboard plow, cultivators ,danco C2 mower,1961 Comet, 1984 BMW 318i

Part of life is falling down, living is getting back up.
Top
Stretch
10+ Years
10+ Years
Posts: 74
Joined: Tue Oct 09, 2007 1:24 pm
Zip Code: 21838
Tractors Owned: '57 Farmall 450
'70 Cub
'68 Cub Cadet 124
'33 F-12
'59 Cub Loboy
Location: Marion, MD

Postby Stretch » Fri Feb 22, 2008 6:28 am

M, 400, 450 probably? From what I've seen, that's not really out of line for one that big depending on condition.

But I always try to pay at least a little below asking price... :wink:
Top
Hairy Moose Knuckles
10+ Years
10+ Years
Posts: 270
Joined: Sun Feb 17, 2008 12:32 pm
Zip Code: 00000
Tractors Owned: 1951 Super C

Postby Hairy Moose Knuckles » Fri Feb 22, 2008 9:31 am

I'm sorry, I guess that would help. It goes on a Farmall H
Top
User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:
Contact Bigdog

Postby Bigdog » Fri Feb 22, 2008 9:53 am

That's a decent price. I sold a single cylinder 3 point a while back for $300. It was a home-made unit but was very heavily built and was set up for either an M or H. It must have been copied from the unit in the picture as it looked just like it except for the single cylinder.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com
Top
User avatar
SONNY
10+ Years
10+ Years
Posts: 4106
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 61722

Postby SONNY » Fri Feb 22, 2008 1:43 pm

I gave $300. for a used ABBOTT BROS.,--Blytheville, ark. made one --for the smd, and that was 30 years ago,--no cylinders, but extremely heave made!---So $500 for the one in the pic would be about right in my opinion! It's a good lookin' hitch! thanks; sonny
Top
Hairy Moose Knuckles
10+ Years
10+ Years
Posts: 270
Joined: Sun Feb 17, 2008 12:32 pm
Zip Code: 00000
Tractors Owned: 1951 Super C

Postby Hairy Moose Knuckles » Fri Feb 22, 2008 1:54 pm

Thanks, Sonny!
Top
User avatar
parts man
10+ Years
10+ Years
Posts: 619
Joined: Wed Jul 30, 2003 9:41 pm
Location: Sussex N.B. Can.
Contact:
Contact parts man

Postby parts man » Fri Feb 22, 2008 7:03 pm

I just ordered a new one for a customer here in NB, and when it lands here with the cylinders he'll have right in the ballpark of $1500 into it! :shock: More than I would put into one, that's for certain!
V.P. of T.S.A. (taking stuff apart)
Top
RustyFarmall
10+ Years
10+ Years
Posts: 173
Joined: Fri Nov 16, 2007 4:14 pm
Zip Code: 51646
Location: New Market, Iowa
Contact:
Contact RustyFarmall

Postby RustyFarmall » Sat Feb 23, 2008 10:57 am

Yep, a brand new set up will take about $1,000 out of your pocket real fast, and then you still need cylinders.
Top
WKPoor
10+ Years
10+ Years

Postby WKPoor » Mon Feb 25, 2008 6:12 pm

The one I bought a few yrs back was IMO the finest made one on the market. Its is a Saginaw 2 cylinder. Extremely heavy built. Price with shipping $750.00. Just go to http://www.saginawcountytractor.com/. He has pics there too. Unit weighs in somewhere near 400+lbs.
Top
Post Reply

Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 4 guests