Farmall Cub

My 340 Utility has two sets of hydraulic outputs that are controlled by HydroTouch valves (used for loader), and hydraulic lines running back to the Fasthitch, with it's own TeleDepth control lever. I would like to add a set of hydraulic outputs back to the rear to attach to a hitch mounted log splitter attachment (has it's own control valve). Can anyone tell me what would be involved, and where you'd tie in, to add that capability?

Thanks

Hi Paul. I looked on the Parts CD that I have and they show an optional "Remote Control Adapter Package" for the 340 Hydra with fasthitch. Looks like it has two hoses with quick connects at the end. It also says the hoses attach to the rt outer valve????? It doesn't show any pics of the hook-up to the valve. The package has a part number as B-372539R91.

Maybe you can contact Jamie at JP's and see if they have a 340 with this set-up to sell you.

Hope this helps a little,
Rick

Rick

Thanks for your response, and for finding that adapter capability. I also have a parts CD but never saw that. I went looking for it after I read your post and sure enough! The "right outer valve"? I'll take a closer look at my valve manifold and see what they're talking about. That would sure be a much easier fix than anything else I've considered and that's good news.

Thanks again!

Paul