This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Remote control valve on Farmall 200

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
CubitisNH
10+ Years
10+ Years
Posts: 565
Joined: Sun May 14, 2006 3:59 pm
Zip Code: 00000
Circle of Safety: Y
Location: Plymouth,NH

Remote control valve on Farmall 200

Postby CubitisNH » Sat Dec 02, 2006 6:07 pm

I've just started using a Farmall 200 that hasn't been run for about 6-7 years.When I pulled the handle to raise the fast-hitch,hyd. oil started spraying out at the top of the remote valve. My question is--does the valve use common o-rings or special seals,and are they still available? Thanks for any advice,Mike
How can you have too many Cubs????
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Jim Becker
Team Cub
Team Cub
Posts: 17272
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Sat Dec 02, 2006 11:48 pm

Appears to be a common lip type seal - 356784R91.
Top
CubitisNH
10+ Years
10+ Years
Posts: 565
Joined: Sun May 14, 2006 3:59 pm
Zip Code: 00000
Circle of Safety: Y
Location: Plymouth,NH

Postby CubitisNH » Sun Dec 03, 2006 6:38 pm

Thanks,Jim--I'll try that number at the local NAPA or the nearest CNH dealer.
How can you have too many Cubs????
Top
JBall8019
10+ Years
10+ Years
Posts: 418
Joined: Sat Jan 17, 2004 6:40 pm
Location: Lordstown, Ohio

Postby JBall8019 » Mon Dec 11, 2006 7:32 am

mike,
those older seals do shink after sitting and sometimes swell after the oil comes in contact with the seal. since the oil was spraying out the top, did you check your hyd lines to see if the got crimped or smashed?
john
Top
CubitisNH
10+ Years
10+ Years
Posts: 565
Joined: Sun May 14, 2006 3:59 pm
Zip Code: 00000
Circle of Safety: Y
Location: Plymouth,NH

Postby CubitisNH » Mon Dec 11, 2006 8:04 pm

John- the next day as I was starting the tractor,I noticed with each turn of the engine,oil was leaking out where the manifold tubes bolt to the valve,O-rings must have failed. I got new ones but haven't had time to change them yet. Thanks for the reply,Mike
How can you have too many Cubs????
Top
Post Reply

Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 6 guests