Farmall/IH/McCormick 100 manure spreader

[Spion92]

Apologies if this is the wrong Forum to post in but I need some help with my Manure spreader. As the title says, I think it’s a Farmall or McCormick 100 manure spreader. I need what a tractor mechanic told me is a “dog spring” behind the rear tire? See pics. To me it looks like there should be a bolt of some kind there and possibly a spring but I’m unsure what it should look like. It fell off at some point when transporting. Any help is appreciated! I don’t know much about these things so excuse my ignorance!

File was too big on my phone so I had to upload pics to OneDrive:

https://1drv.ms/i/s!AipwMAOxjAkpmDvMDswMz7NpGviZ
https://1drv.ms/i/s!AipwMAOxjAkpmDqvPv7WNNl7aq43

[Barnyard]

Post the pix.

[Spion92]

Post the pix.

Just posted. Thanks

[Barnyard]

It looks like you are missing the ratchet pawl and the ratchet stop pawl spring along with a few other things.

[Spion92]

It looks like you are missing the ratchet pawl and the ratchet stop pawl spring along with a few other things.

manure spreader.jpg
manure spreader2.jpg
manure spreader1.JPG

Thank you! Know of any where I could find these parts?

[Barnyard]

About the only way I know is to watch for a junk one come up for sale and buy it. You might check with JP Tractor to see if they have one.

[Bob McCarty]

And put a "wanted" in the "Vine" classified section. If you're lucky, a forum member might have a parts spreader. You might check parts numbers and see if the 200 spreader has the same parts. Might be easier to find parts off a 200.

[Spion92]

About the only way I know is to watch for a junk one come up for sale and buy it. You might check with JP Tractor to see if they have one.

https://cottagecraftworks.com/mccormick ... ader-parts

I found this site. They have the pawl and pawl spring. Does that look like what I need?

[Spion92]

And put a "wanted" in the "Vine" classified section. If you're lucky, a forum member might have a parts spreader. You might check parts numbers and see if the 200 spreader has the same parts. Might be easier to find parts off a 200.

Will do. I’m honestly not sure if mine is a 100 or 200. How can I tell?

[Barnyard]

I found this site. They have the pawl and pawl spring. Does that look like what I need?

It looks like it should. Keep in mind, you need additional parts as well. You will need to determine what else is missing.

[Bob McCarty]

Will do. I’m honestly not sure if mine is a 100 or 200. How can I tell?

An easy way to tell is by tire size. The 100 uses 5.50 x 16, the 200 uses 7.50 x 20. A picture of the side of the spreader would allow confirmation.