This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall C head torque
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 64
- Joined: Mon Apr 12, 2010 1:54 pm
- Zip Code: 55616
- Tractors Owned: 1949 IH C
1956 IH 200
1961 Cub Lo-boy - Location: Two Harbors, MN
Farmall C head torque
I'm replacing the rings and having the head and valves done on my Farmall C (SN 12096). Does anyone know what the head bolts should be torqued to, and sequence? Thanks Corlis
-
- 10+ Years
- Posts: 64
- Joined: Mon Apr 12, 2010 1:54 pm
- Zip Code: 55616
- Tractors Owned: 1949 IH C
1956 IH 200
1961 Cub Lo-boy - Location: Two Harbors, MN
Re: Farmall C head torque
Oh, found the answer below in another post "Engine Torque for C113", thanks John!
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Farmall C head torque
cwest03 wrote:Oh, found the answer below in another post "Engine Torque for C113", thanks John!
I believe IH updated the spec to 80 ft lbs. Correct me if I am wrong.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 64
- Joined: Mon Apr 12, 2010 1:54 pm
- Zip Code: 55616
- Tractors Owned: 1949 IH C
1956 IH 200
1961 Cub Lo-boy - Location: Two Harbors, MN
Re: Farmall C head torque
I also found the information in my I&T Shop and Service manual that I have for my 200. While my 200 has a C123 engine instead of a C113 that my C has, I believe the heads are the same, and use the same head gasket. It states in this manual that heads should be torqued to 65 ft-lb on serial numbers prior to 65001, and 80-90 ft-lb on engines after 65000. Which makes me think they may have changed something in manufacturing??? It looks like the newer heads have a 14 stud design and the older ones have 9 studs, both for the C123 engine. So a change was made with different torque specs I guess.
Corlis
Corlis
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Farmall C head torque
Head gaskets are slightly different for the C-113 vs the C-123. Has to do with the water passage size and water pump.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 1 guest