got a few questions about air intake on super c

Farmall C, Super C Tractors, 200 & 230 1948-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Dixonsc
Posts: 35
Joined: Wed Aug 13, 2014 11:52 am
Zip Code: 29340

got a few questions about air intake on super c

Postby Dixonsc » Wed Aug 13, 2014 12:25 pm

I have a super c that I'm restoring an my carb isn't getting any air from breather. I would also like to know where to look for serial numbers to tell what year I have thanks

User avatar
tmays
5+ Years
5+ Years
501 Club
501 Club
Posts: 2127
Joined: Wed May 11, 2011 8:59 pm
Zip Code: 39180
Tractors Owned: 1948 Allis Chalmers G
1947 Cub
1952 Cub

154 Cub LoBoy
Location: Vicksburg, MS

Re: got a few questions about air intake on super c

Postby tmays » Wed Aug 13, 2014 1:44 pm

Serial number plate should be on the side of the seat base.
Have you cleaned the oil cup at the bottom of the breather? It may be full of trash and dirt
Thomas

Dixonsc
Posts: 35
Joined: Wed Aug 13, 2014 11:52 am
Zip Code: 29340

Re: got a few questions about air intake on super c

Postby Dixonsc » Wed Aug 13, 2014 3:28 pm

I have cleaned the oil cup but still no air gets thro

User avatar
tmays
5+ Years
5+ Years
501 Club
501 Club
Posts: 2127
Joined: Wed May 11, 2011 8:59 pm
Zip Code: 39180
Tractors Owned: 1948 Allis Chalmers G
1947 Cub
1952 Cub

154 Cub LoBoy
Location: Vicksburg, MS

Re: got a few questions about air intake on super c

Postby tmays » Wed Aug 13, 2014 4:29 pm

Will tractor run with breather not attached? If so, then there is obstruction somewhere in breather
Thomas

Dixonsc
Posts: 35
Joined: Wed Aug 13, 2014 11:52 am
Zip Code: 29340

Re: got a few questions about air intake on super c

Postby Dixonsc » Thu Aug 14, 2014 2:03 pm

Yes I have fixed the breather soaked in 5 gallons of gas for a day.. wow that thing was really dirty


Return to “Farmall C, Super C, 200 & 230”

Who is online

Users browsing this forum: No registered users and 0 guests